Scientific Linux (SL) Release 3.0.2 RC2 June 21, 2004 This is Scientific Linux. Please read this entire document before installing. This is based on the rebuilding of RPMS out of SRPMS's from Enterprise 3 AS including Update 2 Please send bug reports and suggestions to scientific-linux-devel@fnal.gov Changes compared to Scientific Linux 3.0.1 (stable version) are indicated by a "*". -------------------------------------------------------------------------- Table of contents DOWNLOAD INFO ADDED compared to Enterprise 3 UPDATED compared to Enterprise 3 Installer modifications Site Info /contrib /notsupported SRPMS MISC Notes HARDWARE SPECIFIC ISSUES SOFTWARE ISSUES/BUGS INFO HARDWARE REQUIREMENTS ERRATA _____________________________________________________________________________ DOWNLOAD INFO _____________________________________________________________________________ * ftp://ftp.scientificlinux.org/linux/scientific/302/ rsync access available upon request. ----------------------------------------------------------------------------- ADDED compared to 3 ----------------------------------------------------------------------------- From Developer Suite eclipse-2.1.0-22.i386.rpm From Cluster Suite clumanager-1.2.3-1.i386.rpm ipvsadm-1.21-9.ipvs108.i386.rpm piranha-0.7.6-1.i386.rpm redhat-config-cluster-1.0.0-5.noarch.rpm Korn shell from ATT ksh93-2000.10.31.0-1.i386.rpm IceWM A small and fast window manager. Good for slower systems or systems with not much memory. It is put it in the graphical login's session list if installed. icewm-1.2.13-3.i386.rpm icewm-l10n-1.2.13-3.i386.rpm *mpg321, xmms-mp3, libmad, libid3tag Because of licensing reasons RedHat did not include MP3 support in their distribution. While this does not fill all cases, this does allow some of the more popular music players to use mp3's. libmad and libid3tag were added for dependancy reasons. mpg321-0.2.10-4fr.i386.rpm * xmms-mp3-1.2.7-1.i386.rpm libmad-0.15.1b-1.fr.i386.rpm libmad-devel-0.15.1b-1.fr.i386.rpm libid3tag-0.15.1b-1.fr.i386.rpm libid3tag-devel-0.15.1b-1.fr.i386.rpm MISC Added these rpms because they are important as RedHat removed them. anacron-2.3-29.i386.rpm from Fedora Core 1 gv-3.5.8-23.i386.rpm from Fedora Core 1 ncurses4-5.0-12.i386.rpm from Fedora Core 1 readline41-4.1-17.i386.rpm from Fedora Core 1 xcdroast-0.98a14-2.i386.rpm from Fedora Core 1 jpilot-0.99.6-1.i386.rpm from Fedora Core 1 sndconfig-0.70-2.i386.rpm from Fedora Core 1 cdda2wav-2.0-11.i386.rpm dependency of xcdroast RedHat added the following rpms as part of Update 1 elfutils-libelf-devel-0.91-3.i386.rpm jaf-20030319-1.i386.rpm javamail-20031006-1.i386.rpm junit-3.8.1-1.i386.rpm mtx-1.2.18-1.i386.rpm rh-postgresql-pl-7.3.4-8.i386.rpm rh-postgresql-server-7.3.4-8.i386.rpm rh-postgresql-test-7.3.4-8.i386.rpm * RedHat added the following rpms as part of Update 2 * * net-snmp-perl-5.0.9-2.30E.3.i386.rpm * imap-utils-2002d-8.i386.rpm * java-javadoc-1.5.33-1jpp_4rh.noarch.rpm * jpackage-utils-1.5.33-1jpp_4rh.noarch.rpm * laus-0.1-56RHEL3.i386.rpm * laus-devel-0.1-56RHEL3.i386.rpm * laus-libs-0.1-56RHEL3.i386.rpm * pam_passwdqc-0.7.5-1.i386.rpm * php-devel-4.3.2-11.ent.i386.rpm * rhgb-0.11.2-4.i386.rpm * sg3_utils-1.06-2.i386.rpm *rhgb * Remove Red Hat from rpm. * rhgb-0.11.2-5.SL.i386.rpm pine RedHat removed because of license issues . pine-4.58-2.i386.rpm Performance Co-Pilot (PCP) Performance Co-Pilot (PCP) is a framework and services to support system-level performance monitoring and performance management. Not installed by default. pcp-2.3.2-4.i386.rpm *SL_enable_serialconsole * Renamed from serialconsole so as to use the new naming convention. This script makes all the changes necessary to send console output to both the serial port and the screen. This also creates a login prompt on the serial port and allows users to login at this prompt. Bug with the default serial number and dealing with a /boot partition were fixed in version 3.1. * SL_enable_serialconsole-3.1-3.noarch.rpm *Yum -- From Duke University * yum-2.0.7-1.SL.noarch.rpm * * yum 2.0.7 contains minor bug fixes along with the feature * of yum [action] package.somearch support added for * erase/remove, install, update and upgrade * yum-conf-302-2.SL.noarch.rpm * * Changed to reflect 302 * Changed main server to ftp.scientificlinux.org * Added a commented out 302contib section in yum.conf * Made it easier for users to change where their repository is. * For yum.cron you now only have to change the files * /etc/yum.d/yum.cron.primary and/or yum.cron.secondary * You can add multiple repository in either file, or leave either blank. * The servers in primary will be used in the order they are in the * file. The servers in secondary will be used randomly. So if you * are concerned about overloading your one server, leave the primary * blank, and list all your servers in secondary, where they will * be used randomly now uses new feature "tolerant=1" for yum.cron * yumi-2.0.7-2.noarch.rpm * * GUI written for YUM *openafs * * Updated to 1.2.11 * * kernel-module-openafs-2.4.21-15.0.2.EL-1.2.11-15.5.SL.athlon.rpm * kernel-module-openafs-2.4.21-15.0.2.ELsmp-1.2.11-15.5.SL.athlon.rpm * kernel-module-openafs-2.4.21-15.0.2.EL-1.2.11-15.5.SL.i686.rpm * kernel-module-openafs-2.4.21-15.0.2.ELsmp-1.2.11-15.5.SL.i686.rpm * openafs-1.2.11-15.5.SL.i386.rpm * openafs-client-1.2.11-15.5.SL.i386.rpm * openafs-compat-1.2.11-15.5.SL.i386.rpm * openafs-devel-1.2.11-15.5.SL.i386.rpm * openafs-kernel-source-1.2.11-15.5.SL.i386.rpm * openafs-kpasswd-1.2.11-15.5.SL.i386.rpm * openafs-krb5-1.2.11-15.5.SL.i386.rpm * openafs-server-1.2.11-15.5.SL.i386.rpm * * openafs-firstboot-1.2.11-5.SL.noarch.rpm * * The openafs-firstboot rpm enables "firstboot" to ask about * what AFS cell you want and if you want afs started at boot. * * Note the name change for the kernel module. This change was * done to follow the fedora kernel-module naming convention These are not installed by default. Now these can be selected in the installer. *SL_desktop_tweeks-1.1-1.i386.rpm was zz_desktop_tweeks-1.1-1.i386.rpm This adds a terminal and mozilla icon to the kicker panel for both KDE and GNOME. Installed by default for both KDE and GNOME. *SL_inittab_change-1.0-4.i386.rpm was zz_inittab_change-1.0-4.i386.rpm Changes /etc/inittab to require the root password for single user mode. Not installed by default. *SL_libg2c.a_change-3.2.3-1.i386.rpm was zz_libg2c.a_change-3.2.3-1.i386.rpm Creates a missing symbolic link in the gcc-g77 package from /usr/lib/libg2c.a to /usr/lib/gcc-lib/i386-redhat-linux/3.2.3/libg2c.a Installed with gcc-g77. *SL_no_colorls-1.0-1.noarch.rpm was zz_no_colorls-1.0-1.noarch.rpm Turns off "color" of ls. Not installed by default. *SL_sendmail_accept-1.0-2.i386.rpm was zz_sendmail_accept-1.0-2.i386.rpm Changes Sendmail config so that it allows incomming mail. Not installed by default. Moved the following rpms over from /notsupported/RPMS as they really should be in the release. Note that /notsupported/RPMS are available via yum or apt. mysql-server-3.23.58-1.i386.rpm tcllib-1.3-92.i386.rpm tk-devel-8.3.5-92.i386.rpm unixODBC-devel-2.2.3-6.i386.rpm Documentation Documentation in /sites/example/build/documentation on how to make new "sites" including scripts to create site iso images. * These were updated to Update 2 versions * * rhel-ig-x8664-multi-en-3-3.noarch.rpm * rhel-isa-en-3-3.noarch.rpm * rhel-rg-en-3-3.noarch.rpm * rhel-sag-en-3-3.noarch.rpm * rhel-sg-en-3-3.noarch.rpm * rhel-devtools-en-3-3.noarch.rpm * rh-cs-en-3-3.noarch.rpm *apt-get Scientific Linux is aptable. Both Yum and apt are installed by default. With yum handling the "auto update" function. * apt-0.5.15cnc6-4.SL.i386.rpm * apt-devel-0.5.15cnc6-4.SL.i386.rpm * apt-sourceslist-302-4.SL.i386.rpm * apt-firstboot-1-4.SL.noarch.rpm * apt-scripts-1-4.SL.noarch.rpm * apt-autoupdate-1-4.SL.noarch.rpm * synaptic-0.51-1.i386.rpm * apt-autoupdate provides "auto update" functionality that * can be enabled via chkconfig or the "firstboot" questions. * * apt-scripts privides useful lua scripts. * * Updated synaptic gives the ability to "hold" rpms. It also * fixes many bugs. * apt-sourceslist points to ftp.scientificlinux.org Please change to your local mirror. --------------------------------------------------------------------------- UPDATED compared to 3 ---------------------------------------------------------------------------- *KERNEL * Latest errata kernel . * kernel-2.4.21-15.0.2.EL.athlon.rpm * kernel-2.4.21-15.0.2.EL.i686.rpm * kernel-BOOT-2.4.21-15.0.2.EL.i386.rpm * kernel-doc-2.4.21-15.0.2.EL.i386.rpm * kernel-hugemem-2.4.21-15.0.2.EL.i686.rpm * kernel-hugemem-unsupported-2.4.21-15.0.2.EL.i686.rpm * kernel-smp-2.4.21-15.0.2.EL.athlon.rpm * kernel-smp-2.4.21-15.0.2.EL.i686.rpm * kernel-smp-unsupported-2.4.21-15.0.2.EL.athlon.rpm * kernel-smp-unsupported-2.4.21-15.0.2.EL.i686.rpm * kernel-source-2.4.21-15.0.2.EL.i386.rpm * kernel-unsupported-2.4.21-15.0.2.EL.athlon.rpm * kernel-unsupported-2.4.21-15.0.2.EL.i686.rpm Note the "unsupported" kernel rpms. These contain modules that are not in the "default kernel rpms". RedHat EULA required changes anaconda-images redhat-artwork redhat-logos anaconda-help indexhtml RedHat requires that the following rpms be changed as part of their EULA (End User License Agreement) dhcp Fixes a problem with the drift file for ntp not being in the right place. dhcp-3.0pl2-6.16.i386.rpm From Fedora core 1 * dhclient-3.0pl2-6.16.i386.rpm From Fedora core 1 mozilla Mozilla's default bookmarks all pointed to RedHat's web area's. The default bookmarks were changed. mozilla-1.4.2-3.0.2.sl1.i386.rpm mozilla-chat-1.4.2-3.0.2.sl1.i386.rpm mozilla-dom-inspector-1.4.2-3.0.2.sl1.i386.rpm mozilla-js-debugger-1.4.2-3.0.2.sl1.i386.rpm mozilla-mail-1.4.2-3.0.2.sl1.i386.rpm mozilla-nspr-1.4.2-3.0.2.sl1.i386.rpm mozilla-nss-1.4.2-3.0.2.sl1.i386.rpm nedit Nedit was found to have a bug preventing it from opening files. Rebuilding from source did not clear up the problem. It also showed a comment that STRONGLY suggested just getting the binaries from nedit.org. We followed this advice, and we packaged the binaries from nedit.org, into an rpm nedit-5.4-1.i386.rpm Fixes to misc RPMS Added "Requires" of coreutils so that it will install during the install gstreamer-0.6.0-5f1.i386.rpm gstreamer-tools-0.6.0-5f1.i386.rpm Added "Requires" of tetex-afm so that it will be able to print after install. It was missing fonts provided in tetex-afm. a2ps-4.13b-28_SL.i386.rpm ---------------------------------------------------------------------------- Installer modifications --------------------------------------------------------------------------- Included "generic" installer graphics RedHat requires us as part of their "EULA" that we replace the images in "anaconda-images" with our own. anaconda-images Anaconda (installer) * anaconda-9.1.2-2.7.SL.i386.rpm * anaconda-runtime-9.1.2-2.7.SL.i386.rpm * * Fixes to support rpms that installer needs to be split between * /SL/RPMS/ and sites//Updates/ anaconda-help-9.1-3.SL.noarch.rpm Fixed a bug that RedHat introduced in loader2/method.c which broke specifying the install method on the command line. Added code to support "site" customizations which include Custom installer kernel(needs nptl) Custom installer(anaconda) including graphics Added RPMS ability to select packages to install by default via "comps.xml" Modified/replaced RPMS (ability to upgrade or downgrade version) see /sites Made a "Packages added to SL" group so that you could select any of these added RPMS during the install --------------------------------------------------------------------------- Site Info --------------------------------------------------------------------------- /sites/example/ README Now just says to read docs in /sites/example/documentation build/documentation/ README Describes files and directories in /sites/example/ README.steps Step by step of what is needed to make a new site README.images Info on how to change the graphics used during the install * /sites/example/build/scripts/ * transform.sh Script that does all the steps of README.steps except the original copying of the example tree over to the new site * make.site.from.release.sh Script that will take a Enterprise 3 tree and make a site out of it. Tested with cel3(CERN) and Fermi Linux . Called by make.new.site.sh * make.new.site.sh Script that will take either a Enterprise 3 tree or the example site and make a site out of it. --------------------------------------------------------------------------- /contrib/ --------------------------------------------------------------------------- The packges in this section have been contributed by various people. They are presented AS IS and there is no guarantee of them working. These packages are NOT supported by us. They will only get security updates if the contributor provides them. If you have questions about them then ask the contributor. There are some rules to follow to be able to contribute to this area. These rules might adjust some. 1- Contract Troy Dawson with the rpm's that you wish to contribute. If Troy doesn't personally know you, be prepared with some some way to show him that you can be trusted. He is a nice guy but he also is very concerned that this contrib section doesn't get abused. 2- The contributed rpm's must be able to go into a standard Scientific Linux 3.0.1 release without any extra outside rpms. If extra rpm's are required, they must be supplied. All extra rpm's supplied must meet the same criteria as the main rpm's. 3- For each rpm, the source rpm (src.rpm) must be provided. 4- For each source rpm, you must provide where you got it. 5- Both rpm's and srpm's must be digitally signed. 6- Rpms must be freely distributable. We understand this sounds like alot of work, but once you do it once, it becomes much easier. RPMS/ * SGI xfs filesystem utilities and kernels provided by CERN * * acl-2.2.23-1.i386.rpm * attr-2.4.15-1.i386.rpm * dmapi-2.1.0-1.i386.rpm * dmapi-devel-2.1.0-1.i386.rpm * libacl-2.2.23-1.i386.rpm * libacl-devel-2.2.23-1.i386.rpm * libattr-2.4.15-1.i386.rpm * libattr-devel-2.4.15-1.i386.rpm * xfsdump-2.2.19-1.i386.rpm * xfsprogs-2.6.10-1.i386.rpm * xfsprogs-devel-2.6.10-1.i386.rpm * * kernel-2.4.21-15.0.2.EL.SL.athlon.rpm * kernel-2.4.21-15.0.2.EL.SL.i686.rpm * kernel-BOOT-2.4.21-15.0.2.EL.SL.i386.rpm * kernel-doc-2.4.21-15.0.2.EL.SL.i386.rpm * kernel-hugemem-2.4.21-15.0.2.EL.SL.i686.rpm * kernel-hugemem-unsupported-2.4.21-15.0.2.EL.SL.i686.rpm * kernel-module-xfs-2.4.21-15.0.2.EL.SL-0.20040230-2.cern.athlon.rpm * kernel-module-xfs-2.4.21-15.0.2.EL.SL-0.20040230-2.cern.i686.rpm * kernel-module-xfs-2.4.21-15.0.2.EL.SLsmp-0.20040230-2.cern.athlon.rpm * kernel-module-xfs-2.4.21-15.0.2.EL.SLsmp-0.20040230-2.cern.i686.rpm * kernel-smp-2.4.21-15.0.2.EL.SL.athlon.rpm * kernel-smp-2.4.21-15.0.2.EL.SL.i686.rpm * kernel-smp-unsupported-2.4.21-15.0.2.EL.SL.athlon.rpm * kernel-smp-unsupported-2.4.21-15.0.2.EL.SL.i686.rpm * kernel-source-2.4.21-15.0.2.EL.SL.i386.rpm * kernel-unsupported-2.4.21-15.0.2.EL.SL.athlon.rpm * kernel-unsupported-2.4.21-15.0.2.EL.SL.i686.rpm */documentation/ * * README.xfs * README.yum * READNE.openssh.gss --------------------------------------------------------------------------- /notsupported/RPMS/ --------------------------------------------------------------------------- The vendor decided that they could not support all of the rpms that may be included in a SRPM. So I have included those here. They are NOT supported by the vendor and thus are NOT supported by us. They are included here for completeness. These are installable via yum or apt. --------------------------------------------------------------------------- /../SRPMS/ --------------------------------------------------------------------------- / Contains the SRPMS for what we added or changed. /vendor/ /errata SRPMS from vendor for errata. /original SRPMS from vendor for originally released Enterpise 3 . /sites//SRPMS SRPMS for site --------------------------------------------------------------------------- MISC NOTES --------------------------------------------------------------------------- Upgrades from prior versions. UPDATES are NOT supported for all versions of SL . This is NOT something that we changed. Future releases may support upgrading from SL 3.0.1 to future version of SL 3.0.x. UPDATES will NOT work from anything except RedHat AS 2.1. --------------------------------------------------------------------------- HARDWARE SPECIFIC ISSUES --------------------------------------------------------------------------- Cisco Aironet 350 wireless ethernet card If you install Windows patch xxx in addition to upgrading the windows driver it also upgrades the firmware in the Cisco 350 wireless card. Info from Cisco follows. The "good" firmware is 4.25.30 or 1.6.7 or 1.5 . If it is 5.20.17 then it is the BAD firmware. I got these firmware versions from the Cisco website. "Recommended repair is a firmware down-grade of the Cisco Aironet 350 PCMCIA network interface card as Cisco has not released a updated Linux for the upgraded firmware as of yet." Xircom ethernet Will panic the kernel. 3com 905 ethernet (Not the A or B or C version) Seems like orginal 905 does not work but 905a does. Make sure Plug-n-Play if OFF in your bios. This has made some 905's work. Also seems like there is a kernel bug tickled by kudzu. So to get this card to work you will need to turn kudzu off. chkconfig --level 35 kudzu off --------------------------------------------------------------------------- SOFTWARE ISSUES/BUGS --------------------------------------------------------------------------- XFree86 and ATI After the successful install (again using the graphical X-windows install) and after what appears to be a successful boot up, I get a blank screen and just sits there. Both the Radeon and Nvidia driver in this XFree86 4.3.0 release does not detect that you are using the digital port of flat panel monitors. The easy thing to do is plug into the analog port until you can get past the install. sgi_fam with tcpwrappers(/etc/hosts.deny) Error messages /var/log/secure such as Jan 22 12:33:33 systemname xinetd[25122]: FAIL: sgi_fam libwrap from= Jan 22 12:33:33 systemname xinetd[3819]: START: sgi_fam pid=25123 from=Jan 22 12:33:33 systemname xinetd[25123]: FAIL: sgi_fam libwrap from= Only solution so far is to change /etc/hosts.allow to allow sgi_fam with fam: ALL This could be a security risk so you must decide. redhat-config-packages This rpm only installs packages via cdrom. It is not useful. It does NOT work so do NOT try to use it. Use yum instead. It is useful. It is only included here because rpms have dependencies on it and I do not want to change those to remove the dependencies. /usr/X11R6/lib The "final link" to each of the libraries is missing. Should be libX11.so.6.2 <- libX11.so.6 <- libX11.so But is libX11.so.6.2 <- libX11.so.6 Solution is to install Xfree86-devel. This rpm will make the missing links. --------------------------------------------------------------------------- INFO --------------------------------------------------------------------------- Web Site http://www-oss.fnal.gov/projects/fermilinux/sl/ https://plone.fnal.gov/Plone/Scientific%20Linux/ FTP * ftp://ftp.scientificlinux.org/linux/scientific/302/ Mailing Lists scientific-linux-devel@fnal.gov Development of Scientific Linux scientific-linux-users@fnal.gov Users of Scientific Linux supporting each other scientific-linux-announce@fnal.gov Announcements concerning Scientific Linux _____________________________________________________________________________ HARDWARE REQUIREMENTS _____________________________________________________________________________ The following information represents the minimum hardware requirements necessary to successfully install Scientific Linux : - Minimum: Pentium-pro class, but in reality at least a Pentium II - Recommended for text-mode: - Minimum of 400 MHz Pentium-II - Minimum of 128MB Memory - Recommended for graphical: - Minimum of 400 MHz Pentium II - Minimum of 128MB - Recommended: 192MB Hard Disk Space (NOTE: Additional space will be required for user data): - Common "Generic Desktop" Installation : 1.5GB --------------------------------------------------------------------------- ERRATA included - rebuilt from SRPMS /errata/SL/RPMS/ --------------------------------------------------------------------------- Updated (contains all of Update 1 and Update 2(except for rdist)) compared to original 3 released on October 26, 2003. * kernel-2.4.21-15.0.2.EL.athlon.rpm * kernel-2.4.21-15.0.2.EL.i686.rpm * kernel-BOOT-2.4.21-15.0.2.EL.i386.rpm * kernel-doc-2.4.21-15.0.2.EL.i386.rpm * kernel-hugemem-2.4.21-15.0.2.EL.i686.rpm * kernel-hugemem-unsupported-2.4.21-15.0.2.EL.i686.rpm * kernel-smp-2.4.21-15.0.2.EL.athlon.rpm * kernel-smp-2.4.21-15.0.2.EL.i686.rpm * kernel-smp-unsupported-2.4.21-15.0.2.EL.athlon.rpm * kernel-smp-unsupported-2.4.21-15.0.2.EL.i686.rpm * kernel-source-2.4.21-15.0.2.EL.i386.rpm * kernel-unsupported-2.4.21-15.0.2.EL.athlon.rpm * kernel-unsupported-2.4.21-15.0.2.EL.i686.rpm * libpng10-1.0.13-14.i386.rpm * libpng-1.2.2-24.i386.rpm * libpng-devel-1.2.2-24.i386.rpm * squirrelmail-1.4.3-0.e3.1.noarch.rpm * cvs-1.11.2-24.i386.rpm * ethereal-0.10.3-0.30E.2.i386.rpm * ethereal-gnome-0.10.3-0.30E.2.i386.rpm * krb5-devel-1.2.7-24.i386.rpm * krb5-libs-1.2.7-24.i386.rpm * krb5-server-1.2.7-24.i386.rpm * krb5-workstation-1.2.7-24.i386.rpm * squid-2.5.STABLE3-6.3E.i386.rpm * rhel-ig-x8664-multi-en-3-3.noarch.rpm * rhel-isa-en-3-3.noarch.rpm * rhel-rg-en-3-3.noarch.rpm * rhel-sag-en-3-4.noarch.rpm * rhel-sg-en-3-3.noarch.rpm * elfutils-0.94-1.i386.rpm * elfutils-devel-0.94-1.i386.rpm * elfutils-libelf-0.94-1.i386.rpm * elfutils-libelf-devel-0.94-1.i386.rpm * gdb-6.0post-0.20040223.20.i386.rpm * gnome-panel-2.2.2.1-7.i386.rpm * kernel-utils-2.4-8.37.5.i386.rpm * lha-1.14i-10.2.i386.rpm * libpcap-0.7.2-7.E3.2.i386.rpm * rsync-2.5.7-4.3E.i386.rpm * sendmail-8.12.11-3.3.i386.rpm * sendmail-cf-8.12.11-3.3.i386.rpm * tcpdump-3.7.2-7.E3.2.i386.rpm * up2date-4.2.16-1.i386.rpm * up2date-gnome-4.2.16-1.i386.rpm * utempter-0.5.5-1.3EL.0.i386.rpm * kdelibs-3.1.3-6.4.i386.rpm * kdelibs-devel-3.1.3-6.4.i386.rpm * arptables_jf-0.0.7-0.3E.i386.rpm * at-3.1.8-47.ent.i386.rpm * binutils-2.14.90.0.4-35.i386.rpm * cpp-3.2.3-34.i386.rpm * cyrus-sasl-2.1.15-8.i386.rpm * cyrus-sasl-devel-2.1.15-8.i386.rpm * cyrus-sasl-gssapi-2.1.15-8.i386.rpm * cyrus-sasl-md5-2.1.15-8.i386.rpm * cyrus-sasl-plain-2.1.15-8.i386.rpm * distcache-0.4.2-9.3.i386.rpm * distcache-devel-0.4.2-9.3.i386.rpm * doxygen-1.3.5-0.RHEL3.1.i386.rpm * fontconfig-2.2.1-8.0.i386.rpm * fontconfig-devel-2.2.1-8.0.i386.rpm * gcc-3.2.3-34.i386.rpm * gcc-c++-3.2.3-34.i386.rpm * gcc-c++-ssa-3.5ssa-0.20030801.47.i386.rpm * gcc-g77-3.2.3-34.i386.rpm * gcc-g77-ssa-3.5ssa-0.20030801.47.i386.rpm * gcc-gnat-3.2.3-34.i386.rpm * gcc-java-3.2.3-34.i386.rpm * gcc-java-ssa-3.5ssa-0.20030801.47.i386.rpm * gcc-objc-3.2.3-34.i386.rpm * gcc-objc-ssa-3.5ssa-0.20030801.47.i386.rpm * gcc-ssa-3.5ssa-0.20030801.47.i386.rpm * GConf2-2.2.1-4.i386.rpm * GConf2-devel-2.2.1-4.i386.rpm * gdm-2.4.1.6-5.i386.rpm * glibc-2.3.2-95.20.i386.rpm * glibc-2.3.2-95.20.i686.rpm * glibc-common-2.3.2-95.20.i386.rpm * glibc-devel-2.3.2-95.20.i386.rpm * glibc-headers-2.3.2-95.20.i386.rpm * glibc-profile-2.3.2-95.20.i386.rpm * glibc-utils-2.3.2-95.20.i386.rpm * gnome-mime-data-2.2.0-3.i386.rpm * hwdata-0.101.8-1.noarch.rpm * imap-2002d-8.i386.rpm * initscripts-7.31.13.EL-1.i386.rpm * ipsec-tools-0.2.5-0.4.i386.rpm * iptables-1.2.8-12.3.i386.rpm * iptables-ipv6-1.2.8-12.3.i386.rpm * kbd-1.08-10.2.i386.rpm * kudzu-1.1.22.2-1.i386.rpm * kudzu-devel-1.1.22.2-1.i386.rpm * libf2c-3.2.3-34.i386.rpm * libgcc-3.2.3-34.i386.rpm * libgcc-ssa-3.5ssa-0.20030801.47.i386.rpm * libgcj-3.2.3-34.i386.rpm * libgcj-devel-3.2.3-34.i386.rpm * libgcj-ssa-3.5ssa-0.20030801.47.i386.rpm * libgcj-ssa-devel-3.5ssa-0.20030801.47.i386.rpm * libgnat-3.2.3-34.i386.rpm * libmudflap-3.5ssa-0.20030801.47.i386.rpm * libmudflap-devel-3.5ssa-0.20030801.47.i386.rpm * libobjc-3.2.3-34.i386.rpm * libstdc++-3.2.3-34.i386.rpm * libstdc++-devel-3.2.3-34.i386.rpm * libstdc++-ssa-3.5ssa-0.20030801.47.i386.rpm * libstdc++-ssa-devel-3.5ssa-0.20030801.47.i386.rpm * mdadm-1.5.0-3.i386.rpm * modutils-2.4.25-12.EL.i386.rpm * modutils-devel-2.4.25-12.EL.i386.rpm * net-snmp-5.0.9-2.30E.3.i386.rpm * net-snmp-devel-5.0.9-2.30E.3.i386.rpm * net-snmp-utils-5.0.9-2.30E.3.i386.rpm * nptl-devel-2.3.2-95.20.i686.rpm * nscd-2.3.2-95.20.i386.rpm * nss_ldap-207-10.i386.rpm * ntp-4.1.2-4.EL3.1.i386.rpm * openssh-3.6.1p2-33.30.1.i386.rpm * openssh-askpass-3.6.1p2-33.30.1.i386.rpm * openssh-askpass-gnome-3.6.1p2-33.30.1.i386.rpm * openssh-clients-3.6.1p2-33.30.1.i386.rpm * openssh-server-3.6.1p2-33.30.1.i386.rpm * oprofile-0.5.4-22.i386.rpm * oprofile-devel-0.5.4-22.i386.rpm * pam-0.75-54.i386.rpm * pam-devel-0.75-54.i386.rpm * pam_krb5-1.73-1.i386.rpm * php-4.3.2-11.ent.i386.rpm * php-imap-4.3.2-11.ent.i386.rpm * php-ldap-4.3.2-11.ent.i386.rpm * php-mysql-4.3.2-11.ent.i386.rpm * php-odbc-4.3.2-11.ent.i386.rpm * php-pgsql-4.3.2-11.ent.i386.rpm * popt-1.8.2-0.14.i386.rpm * postfix-2.0.16-13.RHEL3.i386.rpm * redhat-config-kickstart-2.3.22-3.noarch.rpm * redhat-config-packages-1.2.9.2-1.noarch.rpm * redhat-config-printer-0.6.47.3.19-1.i386.rpm * redhat-config-printer-gui-0.6.47.3.19-1.i386.rpm * redhat-config-proc-0.23-0.EL3.1.i386.rpm * redhat-rpm-config-8.0.28-2.noarch.rpm * rhpl-0.110.4-1.i386.rpm * rh-postgresql-7.3.6-1.i386.rpm * rh-postgresql-contrib-7.3.6-1.i386.rpm * rh-postgresql-devel-7.3.6-1.i386.rpm * rh-postgresql-docs-7.3.6-1.i386.rpm * rh-postgresql-jdbc-7.3.6-1.i386.rpm * rh-postgresql-libs-7.3.6-1.i386.rpm * rh-postgresql-pl-7.3.6-1.i386.rpm * rh-postgresql-python-7.3.6-1.i386.rpm * rh-postgresql-server-7.3.6-1.i386.rpm * rh-postgresql-tcl-7.3.6-1.i386.rpm * rh-postgresql-test-7.3.6-1.i386.rpm * rpm-4.2.2-0.14.i386.rpm * rpm-build-4.2.2-0.14.i386.rpm * rpm-devel-4.2.2-0.14.i386.rpm * rpm-python-4.2.2-0.14.i386.rpm * shadow-utils-4.0.3-20.i386.rpm * sysklogd-1.4.1-12.1.i386.rpm * SysVinit-2.85-4.2.i386.rpm * unixODBC-2.2.8-2.3.0.2.i386.rpm * unixODBC-devel-2.2.8-2.3.0.2.i386.rpm * unixODBC-kde-2.2.8-2.3.0.2.i386.rpm * up2date-4.2.14-1.i386.rpm * up2date-gnome-4.2.14-1.i386.rpm * vsftpd-1.2.1-3.i386.rpm * xemacs-21.4.13-8.ent.i386.rpm * xemacs-el-21.4.13-8.ent.i386.rpm * xemacs-info-21.4.13-8.ent.i386.rpm * XFree86-100dpi-fonts-4.3.0-62.EL.i386.rpm * XFree86-4.3.0-62.EL.i386.rpm * XFree86-75dpi-fonts-4.3.0-62.EL.i386.rpm * XFree86-base-fonts-4.3.0-62.EL.i386.rpm * XFree86-cyrillic-fonts-4.3.0-62.EL.i386.rpm * XFree86-devel-4.3.0-62.EL.i386.rpm * XFree86-doc-4.3.0-62.EL.i386.rpm * XFree86-font-utils-4.3.0-62.EL.i386.rpm * XFree86-ISO8859-14-100dpi-fonts-4.3.0-62.EL.i386.rpm * XFree86-ISO8859-14-75dpi-fonts-4.3.0-62.EL.i386.rpm * XFree86-ISO8859-15-100dpi-fonts-4.3.0-62.EL.i386.rpm * XFree86-ISO8859-15-75dpi-fonts-4.3.0-62.EL.i386.rpm * XFree86-ISO8859-2-100dpi-fonts-4.3.0-62.EL.i386.rpm * XFree86-ISO8859-2-75dpi-fonts-4.3.0-62.EL.i386.rpm * XFree86-ISO8859-9-100dpi-fonts-4.3.0-62.EL.i386.rpm * XFree86-ISO8859-9-75dpi-fonts-4.3.0-62.EL.i386.rpm * XFree86-libs-4.3.0-62.EL.i386.rpm * XFree86-libs-data-4.3.0-62.EL.i386.rpm * XFree86-Mesa-libGL-4.3.0-62.EL.i386.rpm * XFree86-Mesa-libGLU-4.3.0-62.EL.i386.rpm * XFree86-syriac-fonts-4.3.0-62.EL.i386.rpm * XFree86-tools-4.3.0-62.EL.i386.rpm * XFree86-truetype-fonts-4.3.0-62.EL.i386.rpm * XFree86-twm-4.3.0-62.EL.i386.rpm * XFree86-xauth-4.3.0-62.EL.i386.rpm * XFree86-xdm-4.3.0-62.EL.i386.rpm * XFree86-xfs-4.3.0-62.EL.i386.rpm * XFree86-Xnest-4.3.0-62.EL.i386.rpm * XFree86-Xvfb-4.3.0-62.EL.i386.rpm * ypserv-2.8-6.i386.rpm * dev-3.3.12-1.i386.rpm * MAKEDEV-3.3.12-1.i386.rpm * nfs-utils-1.0.6-21EL.i386.rpm * openoffice.org-1.1.0-16.7.EL.i386.rpm * openoffice.org-i18n-1.1.0-16.7.EL.i386.rpm * openoffice.org-libs-1.1.0-16.7.EL.i386.rpm * redhat-config-network-1.2.60-1.noarch.rpm * redhat-config-network-tui-1.2.60-1.noarch.rpm As of May 10, 2004 openoffice.org-1.1.0-16.SL.i386.rpm openoffice.org-i18n-1.1.0-16.SL.i386.rpm openoffice.org-libs-1.1.0-16.SL.i386.rpm kernel-2.4.21-9.0.3.EL.athlon.rpm kernel-2.4.21-9.0.3.EL.i686.rpm kernel-BOOT-2.4.21-9.0.3.EL.i386.rpm kernel-doc-2.4.21-9.0.3.EL.i386.rpm kernel-hugemem-2.4.21-9.0.3.EL.i686.rpm kernel-hugemem-unsupported-2.4.21-9.0.3.EL.i686.rpm kernel-smp-2.4.21-9.0.3.EL.athlon.rpm kernel-smp-2.4.21-9.0.3.EL.i686.rpm kernel-smp-unsupported-2.4.21-9.0.3.EL.athlon.rpm kernel-smp-unsupported-2.4.21-9.0.3.EL.i686.rpm kernel-source-2.4.21-9.0.3.EL.i386.rpm kernel-unsupported-2.4.21-9.0.3.EL.athlon.rpm kernel-unsupported-2.4.21-9.0.3.EL.i686.rpm cvs-1.11.2-18.i386.rpm squid-2.5.STABLE3-5.3E.i386.rpm ethereal-0.10.3-0.30E.1.i386.rpm ethereal-gnome-0.10.3-0.30E.1.i386.rpm mozilla-1.4.2-3.0.2.sl1.i386.rpm mozilla-chat-1.4.2-3.0.2.sl1.i386.rpm mozilla-dom-inspector-1.4.2-3.0.2.sl1.i386.rpm mozilla-js-debugger-1.4.2-3.0.2.sl1.i386.rpm mozilla-mail-1.4.2-3.0.2.sl1.i386.rpm mozilla-nspr-1.4.2-3.0.2.sl1.i386.rpm mozilla-nss-1.4.2-3.0.2.sl1.i386.rpm httpd-2.0.46-32.ent.i386.rpm httpd-devel-2.0.46-32.ent.i386.rpm mod_ssl-2.0.46-32.ent.i386.rpm nfs-utils-1.0.6-7.EL.i386.rpm openssl096b-0.9.6b-16.i386.rpm openssl-0.9.7a-33.4.i386.rpm openssl-0.9.7a-33.4.i686.rpm openssl-devel-0.9.7a-33.4.i386.rpm gdk-pixbuf-0.22.0-6.1.1.i386.rpm gdk-pixbuf-devel-0.22.0-6.1.1.i386.rpm gdk-pixbuf-gnome-0.22.0-6.1.1.i386.rpm sysstat-4.0.7-4.EL3.2.i386.rpm libxml2-2.5.10-6.i386.rpm libxml2-devel-2.5.10-6.i386.rpm libxml2-python-2.5.10-6.i386.rpm mod_python-3.0.3-3.ent.i386.rpm samba-3.0.2-6.3E.i386.rpm samba-client-3.0.2-6.3E.i386.rpm samba-common-3.0.2-6.3E.i386.rpm eclipse-2.1.1-4.i386.rpm pwlib-1.4.7-7.EL.i386.rpm gaim-0.75-3.2.0.i386.rpm slocate-2.7-3.i386.rpm anaconda-9.1.1-7.RHEL.i386.rpm anaconda-runtime-9.1.1-7.RHEL.i386.rpm binutils-2.14.90.0.4-26.3.i386.rpm elfutils-0.91-3.i386.rpm elfutils-devel-0.91-3.i386.rpm elfutils-libelf-0.91-3.i386.rpm gdb-6.0post-0.20031117.6.i386.rpm popt-1.8.1-4.4.i386.rpm rpm-4.2.1-4.4.i386.rpm rpm-build-4.2.1-4.4.i386.rpm rpm-devel-4.2.1-4.4.i386.rpm rpm-python-4.2.1-4.4.i386.rpm up2date-4.2.5-1.i386.rpm up2date-gnome-4.2.5-1.i386.rpm kdepim-3.1.3-3.3.i386.rpm kdepim-devel-3.1.3-3.3.i386.rpm libpcap-0.7.2-7.E3.1.i386.rpm tcpdump-3.7.2-7.E3.1.i386.rpm ant-1.5.2-23.i386.rpm ant-libs-1.5.2-23.i386.rpm compat-gcc-7.3-2.96.123.i386.rpm compat-gcc-c++-7.3-2.96.123.i386.rpm compat-libstdc++-7.3-2.96.123.i386.rpm compat-libstdc++-devel-7.3-2.96.123.i386.rpm cpp-3.2.3-24.i386.rpm devlabel-0.42.05-2.1.i386.rpm gcc-3.2.3-24.i386.rpm gcc-c++-3.2.3-24.i386.rpm gcc-g77-3.2.3-24.i386.rpm gcc-gnat-3.2.3-24.i386.rpm gcc-java-3.2.3-24.i386.rpm gcc-objc-3.2.3-24.i386.rpm hotplug-2002_04_01-20.2.i386.rpm hwdata-0.101.1-1.noarch.rpm initscripts-7.31.9.EL-1.i386.rpm kdegames-3.1.3-3.2.i386.rpm kinput2-canna-wnn6-v3.1-12.EL.i386.rpm kudzu-1.1.22-1.1.i386.rpm kudzu-devel-1.1.22-1.1.i386.rpm libf2c-3.2.3-24.i386.rpm libgcc-3.2.3-24.i386.rpm libgcj-3.2.3-24.i386.rpm libgcj-devel-3.2.3-24.i386.rpm libgnat-3.2.3-24.i386.rpm libobjc-3.2.3-24.i386.rpm libstdc++-3.2.3-24.i386.rpm libstdc++-devel-3.2.3-24.i386.rpm mdadm-1.4.0-1.i386.rpm modutils-2.4.25-11.EL.i386.rpm modutils-devel-2.4.25-11.EL.i386.rpm netdump-0.6.11-3.i386.rpm netdump-server-0.6.11-3.i386.rpm net-snmp-5.0.9-2.30E.1.i386.rpm net-snmp-devel-5.0.9-2.30E.1.i386.rpm net-snmp-utils-5.0.9-2.30E.1.i386.rpm nss_ldap-207-5.i386.rpm oprofile-0.5.4-13.i386.rpm oprofile-devel-0.5.4-13.i386.rpm pstack-1.2-3.EL.1.i386.rpm quagga-0.96.2-10.3E.i386.rpm redhat-config-kickstart-2.3.20-1.noarch.rpm redhat-config-network-1.2.59-1.noarch.rpm redhat-config-network-tui-1.2.59-1.noarch.rpm redhat-config-packages-1.2.9-1.noarch.rpm redhat-config-xfree86-0.7.7-1.noarch.rpm rh-postgresql-7.3.4-9.i386.rpm rh-postgresql-contrib-7.3.4-9.i386.rpm rh-postgresql-devel-7.3.4-9.i386.rpm rh-postgresql-docs-7.3.4-9.i386.rpm rh-postgresql-jdbc-7.3.4-9.i386.rpm rh-postgresql-libs-7.3.4-9.i386.rpm rh-postgresql-python-7.3.4-9.i386.rpm rh-postgresql-tcl-7.3.4-9.i386.rpm shadow-utils-4.0.3-15.i386.rpm strace-4.5.1-1.EL.1.i386.rpm XFree86-100dpi-fonts-4.3.0-44.EL.i386.rpm XFree86-4.3.0-44.EL.i386.rpm XFree86-75dpi-fonts-4.3.0-44.EL.i386.rpm XFree86-base-fonts-4.3.0-44.EL.i386.rpm XFree86-cyrillic-fonts-4.3.0-44.EL.i386.rpm XFree86-devel-4.3.0-44.EL.i386.rpm XFree86-doc-4.3.0-44.EL.i386.rpm XFree86-font-utils-4.3.0-44.EL.i386.rpm XFree86-ISO8859-14-100dpi-fonts-4.3.0-44.EL.i386.rpm XFree86-ISO8859-14-75dpi-fonts-4.3.0-44.EL.i386.rpm XFree86-ISO8859-15-100dpi-fonts-4.3.0-44.EL.i386.rpm XFree86-ISO8859-15-75dpi-fonts-4.3.0-44.EL.i386.rpm XFree86-ISO8859-2-100dpi-fonts-4.3.0-44.EL.i386.rpm XFree86-ISO8859-2-75dpi-fonts-4.3.0-44.EL.i386.rpm XFree86-ISO8859-9-100dpi-fonts-4.3.0-44.EL.i386.rpm XFree86-ISO8859-9-75dpi-fonts-4.3.0-44.EL.i386.rpm XFree86-libs-4.3.0-44.EL.i386.rpm XFree86-libs-data-4.3.0-44.EL.i386.rpm XFree86-Mesa-libGL-4.3.0-44.EL.i386.rpm XFree86-Mesa-libGLU-4.3.0-44.EL.i386.rpm XFree86-syriac-fonts-4.3.0-44.EL.i386.rpm XFree86-tools-4.3.0-44.EL.i386.rpm XFree86-truetype-fonts-4.3.0-44.EL.i386.rpm XFree86-twm-4.3.0-44.EL.i386.rpm XFree86-xauth-4.3.0-44.EL.i386.rpm XFree86-xdm-4.3.0-44.EL.i386.rpm XFree86-xfs-4.3.0-44.EL.i386.rpm XFree86-Xnest-4.3.0-44.EL.i386.rpm XFree86-Xvfb-4.3.0-44.EL.i386.rpm ypbind-1.12-5.i386.rpm lftp-2.6.3-5.i386.rpm gnupg-1.2.1-10.i386.rpm freeradius-0.9.3-1.i386.rpm rsync-2.5.7-1.i386.rpm glibc-2.3.2-95.6.i386.rpm glibc-2.3.2-95.6.i686.rpm glibc-common-2.3.2-95.6.i386.rpm glibc-devel-2.3.2-95.6.i386.rpm glibc-headers-2.3.2-95.6.i386.rpm glibc-profile-2.3.2-95.6.i386.rpm glibc-utils-2.3.2-95.6.i386.rpm nptl-devel-2.3.2-95.6.i686.rpm nscd-2.3.2-95.6.i386.rpm iproute-2.4.7-11.30E.1.i386.rpm